Violin Microphone Placement

Violin Microphone Placement

violin microphone placement

This is for all you do-it-yourself-ers out there. Recording vocals is the trickiest part of recording a CD, and because it is the last step in the recording process it pays to get it right. So, before you start crooning your soon-to-be smash joint, you will want to make sure that everything in your studio is set up correctly. Following are a few tips that will help you do it right the first time.

#1. Get your recording ready for your voice. This simply means that before you add your voice to the recording… have everything else in place…your instrumentation is completed and mixed to perfection. I know you’re eager to hear yourself on that money-maker but if you fail to do this… you are in for dismal failure at worst, confusion and remixes at best. So, take my advise and don’t put the cart (your voice) before the horse (the instrumentation) if you want to create a masterpiece.

#2. Prepare an enclosed space to record your voice. After you have recorded and mixed your instrumentation…it is time to prepare your studio for recording vocals. Think old- fashioned-phone-booth-with-sound-deadening-insulation and you will get the picture, although the space doesn’t need to be quite that condensed. In other words, you want a space that is enclosed and muffled in such a way that doesn’t cause the voice to bounce off the walls from the resonance. A smaller room does this better than a large room.

#3. Use the best microphone that you can afford as the quality of your microphone… (and the way you use it) will ultimately determine the sound quality for your vocal recording. While the microphone doesn’t have to be expensive, you should avoid low-cost bargain-basement models. Although professional studios tend to use capacitor microphones, a good back-electret or a dynamic vocal microphone can produce excellent results.

#4. Experiment with the placement of the microphone. Some singers will be okay with 6 inches from the mouth while others may need to be closer to the microphone. The microphone should be set in place to pick up all sides of the voice without picking up all the other sounds in the room. Also, the more enclosed and deadened the sound (as mentioned before), the easier it will be to capture the voice.

#5. Use a pop filter – not a foam mic cover. The pop filter will eliminate many of the hissing sounds created by s’s and pop sounds made by b’s and p’s.

#6. Prevent “red zone” peaking. When a voice goes into the red zone it has gone past the maximum allowable volume. To keep this from happening you will need to keep the voice condensed in a specific area. This is why compressors were created. However, the singer can also help with this by pulling back from the mic slightly when singing louder or leaning into the mic for softer, more intimate phrases. Using the pop filter will keep you from getting too close to the mic and this is a good thing for beginners.

#7. Your voice and effects. Don’t go overboard with EQ and reverb while recording. As a matter of fact, you should record the vocal as dry as possible. As with instrumentation you may also want to consider noise gates, which stops the sound from resonating before it is recorded. This is helpful if the voice naturally resonates by having a cut off point where the resonance will stop, making everything clear instead of sounding like it echoes. However, as with the other vocal effects, be careful when applying noise gates as you don’t want to create an unnatural sound. It is best to use effects and noise gates after the voice is recorded as it can then be treated like any other instrument, meaning you can normalize the sound waves, manipulating the volume and gain.

#8. After the recording is finished you can manipulate the sound, adding reverb, flanges, autotune, etc. The degree of manipulation depends on the type of voice you have and the effect that you want to achieve. Since the recording is finished you can experiment here, first analyzing the type of voice you are working with before adding effects such as reverb in the mix. For example, if the voice has a strong resonance, reverb will make it sound like an echo. Adding resonance to a clearer voice, however, will add a little spark to the mix.

As you can see… recording vocals doesn’t have to be hard and complex. Just think of it as putting the icing on the cake. Give yourself room to experiment… and allow yourself the freedom to be different. By taking the time to understand the process… and following the tips outlined here… you will be sure to get the exact sound you are looking for every time.

Jimmy “CL” Newson
Music Independence Summit Connection
http://musicindependenceonline.com

I have over 17 years experience dealing in all aspects of the music industry from audio and video production to marketing and promotions. I am currently working on projects involving internet television, internet radio and live music performances across the United States. My primary focus in on the independent music community. For more information, please visit our website. If you are involved in the independent community or are an independent artists, check us out.

Arensky Waltz from Suite for Two Pianos Bauer Gabrilowitsch

Below are some cheap but quality products related to violin microphone placement. We are pretty sure you will find good deals with the products below relating to violin microphone placement. Enjoy!

Audio-Technica ATM350 Cardioid Condenser Clip-on Microphone $279 Supplied with Audio-Technica’s versatile UniMount clip and new violin mount, the low-profile ATM350 is an exceptional cardioid condenser microphone designed to clip to brass, reeds, piano, snare, toms, and violin. The microphone offers a crisp, clear, well-balanced response, even at high SPLs. It features an integral 80 Hz hi-pass filter and is also equipped with a new in-line power module. Its cardioid polar pattern reduces pickup of sounds from the side and rear for effective protection against feedback. Requires phantom power.Low-profile design for minimum visibility UniMount clip permits accurate positioning, provides shock resistance and protects element Unique violin mount permits unobtrusive placement of microphone between the instrument’s bridge and tailpiece Crisp, clear, well-balanced response, even at high SPLs Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source Interchangeable elements available for hypercardioid and omnidirectional polar patterns Corrosion-resistant contacts from gold-plated XLRM-type connector Rugged, all-metal design and construction for years of trouble-free use

Audio-Technica Atm350 Cardioid Condenser Clip On Microphone $279 Supplied with Audio-Technica’s versatile UniMount clip and new violin mount, the low-profile ATM350 is an exceptional cardioid condenser microphone designed to clip to brass, reeds, piano, snare, toms, and violin. The microphone offers a crisp, clear, well-balanced response, even at high SPLs. It features an integral 80 Hz hi-pass filter and is also equipped with a new in-line power module. Its cardioid polar pattern reduces pickup of sounds from the side and rear for effective protection against feedback. Requires phantom power.Low-profile design for minimum visibility UniMount clip permits accurate positioning, provides shock resistance and protects element Unique violin mount permits unobtrusive placement of microphone between the instrument’s bridge and tailpiece Crisp, clear, well-balanced response, even at high SPLs Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source Interchangeable elements available for hypercardioid and omnidirectional polar patterns Corrosion-resistant contacts from gold-plated XLRM-type connector Rugged, all-metal design and construction for years of trouble-free use

Shadow SH SV2 Twin Disc Violin Pickup $78.4 The Shadow SH SV2 Twin Disc Violin Pickup mounts either between the wings and the feet of your violin’s bridge or between the feet and the violin’s top. You can shape the tone of your sound by varying the placement of your Shadow SH SV2 Twin Disc Violin Pickup.

Used Audio-Technica Bp893c Microearset Headset Condenser Microphone For Wireless Systems Unterminated, Beige Beige $217.49 With its ergonomically molded earpiece and unobtrusive one-inch boom, Audio-Technica’s BP893c MicroEarset offers inconspicuous placement along with clear, natural vocal pickup. Its lightweight low-profile design makes the microphone ideal for use in theatrical performances, houses of worship and broadcast studios. The BP893c MicroEarset is positioned unobtrusively over the ear. Its omnidirectional miniature condenser capsule offers outstanding pickup tailored for natural vocal reproduction, with audio reproduction similar to that of a high-quality lavalier microphone. The microphone is also ideal for use in violin pickup; wear the BP893 over the ear as usual, with no need for clamps on the violin. The BP893c features a BP893 omnidirectional condenser headworn microphone with a 1.4 m (55″) permanently attached miniature cable that is unterminated. Comes with an AT8440 cable clip, two AT8157 windscreens, two AT8156 element covers, a moisture guard, and a carrying case. Note: power module not included. Outstanding clarity and intelligibility Lightweight, ergonomic design Extremely unobtrusive, 1-inch flexible boom Secure over-the-ear placement Extended frequency response for natural vocal reproduction Available in black and beige, wired and wireless models

Used Audio-Technica Bp893c Microearset Headset Condenser Microphone For Wireless Systems Shure Ta4f Beige $253.89 With its ergonomically molded earpiece and unobtrusive one-inch boom, Audio-Technica’s BP893c MicroEarset offers inconspicuous placement along with clear, natural vocal pickup. Its lightweight low-profile design makes the microphone ideal for use in theatrical performances, houses of worship and broadcast studios. The BP893c MicroEarset is positioned unobtrusively over the ear. Its omnidirectional miniature condenser capsule offers outstanding pickup tailored for natural vocal reproduction, with audio reproduction similar to that of a high-quality lavalier microphone. The microphone is also ideal for use in violin pickup; wear the BP893 over the ear as usual, with no need for clamps on the violin. The BP893c features a BP893 omnidirectional condenser headworn microphone with a 1.4 m (55″) permanently attached miniature cable that is unterminated. Comes with an AT8440 cable clip, two AT8157 windscreens, two AT8156 element covers, a moisture guard, and a carrying case. Note: power module not included. Outstanding clarity and intelligibility Lightweight, ergonomic design Extremely unobtrusive, 1-inch flexible boom Secure over-the-ear placement Extended frequency response for natural vocal reproduction Available in black and beige, wired and wireless models

Audio-Technica Bp893c Microearset Headset Condenser Microphone For Wireless Systems Lectrosonics Ta5f Beige $279 With its ergonomically molded earpiece and unobtrusive one-inch boom, Audio-Technica’s BP893c MicroEarset offers inconspicuous placement along with clear, natural vocal pickup. Its lightweight low-profile design makes the microphone ideal for use in theatrical performances, houses of worship and broadcast studios. The BP893c MicroEarset is positioned unobtrusively over the ear. Its omnidirectional miniature condenser capsule offers outstanding pickup tailored for natural vocal reproduction, with audio reproduction similar to that of a high-quality lavalier microphone. The microphone is also ideal for use in violin pickup; wear the BP893 over the ear as usual, with no need for clamps on the violin. The BP893c features a BP893 omnidirectional condenser headworn microphone with a 1.4 m (55″) permanently attached miniature cable that is unterminated. Comes with an AT8440 cable clip, two AT8157 windscreens, two AT8156 element covers, a moisture guard, and a carrying case. Note: power module not included. Outstanding clarity and intelligibility Lightweight, ergonomic design Extremely unobtrusive, 1-inch flexible boom Secure over-the-ear placement Extended frequency response for natural vocal reproduction Available in black and beige, wired and wireless models

Audio-Technica Bp893c Microearset Headset Condenser Microphone For Wireless Systems At Unipak Black $249 With its ergonomically molded earpiece and unobtrusive one-inch boom, Audio-Technica’s BP893c MicroEarset offers inconspicuous placement along with clear, natural vocal pickup. Its lightweight low-profile design makes the microphone ideal for use in theatrical performances, houses of worship and broadcast studios. The BP893c MicroEarset is positioned unobtrusively over the ear. Its omnidirectional miniature condenser capsule offers outstanding pickup tailored for natural vocal reproduction, with audio reproduction similar to that of a high-quality lavalier microphone. The microphone is also ideal for use in violin pickup; wear the BP893 over the ear as usual, with no need for clamps on the violin. The BP893c features a BP893 omnidirectional condenser headworn microphone with a 1.4 m (55″) permanently attached miniature cable that is unterminated. Comes with an AT8440 cable clip, two AT8157 windscreens, two AT8156 element covers, a moisture guard, and a carrying case. Note: power module not included. Outstanding clarity and intelligibility Lightweight, ergonomic design Extremely unobtrusive, 1-inch flexible boom Secure over-the-ear placement Extended frequency response for natural vocal reproduction Available in black and beige, wired and wireless models

Audio-Technica Bp893c Microearset Headset Condenser Microphone For Wireless Systems At Unipak Beige $249 With its ergonomically molded earpiece and unobtrusive one-inch boom, Audio-Technica’s BP893c MicroEarset offers inconspicuous placement along with clear, natural vocal pickup. Its lightweight low-profile design makes the microphone ideal for use in theatrical performances, houses of worship and broadcast studios. The BP893c MicroEarset is positioned unobtrusively over the ear. Its omnidirectional miniature condenser capsule offers outstanding pickup tailored for natural vocal reproduction, with audio reproduction similar to that of a high-quality lavalier microphone. The microphone is also ideal for use in violin pickup; wear the BP893 over the ear as usual, with no need for clamps on the violin. The BP893c features a BP893 omnidirectional condenser headworn microphone with a 1.4 m (55″) permanently attached miniature cable that is unterminated. Comes with an AT8440 cable clip, two AT8157 windscreens, two AT8156 element covers, a moisture guard, and a carrying case. Note: power module not included. Outstanding clarity and intelligibility Lightweight, ergonomic design Extremely unobtrusive, 1-inch flexible boom Secure over-the-ear placement Extended frequency response for natural vocal reproduction Available in black and beige, wired and wireless models

Audio-Technica Bp893c Microearset Headset Condenser Microphone For Wireless Systems Sennheiser 3.5Mm Black $279 With its ergonomically molded earpiece and unobtrusive one-inch boom, Audio-Technica’s BP893c MicroEarset offers inconspicuous placement along with clear, natural vocal pickup. Its lightweight low-profile design makes the microphone ideal for use in theatrical performances, houses of worship and broadcast studios. The BP893c MicroEarset is positioned unobtrusively over the ear. Its omnidirectional miniature condenser capsule offers outstanding pickup tailored for natural vocal reproduction, with audio reproduction similar to that of a high-quality lavalier microphone. The microphone is also ideal for use in violin pickup; wear the BP893 over the ear as usual, with no need for clamps on the violin. The BP893c features a BP893 omnidirectional condenser headworn microphone with a 1.4 m (55″) permanently attached miniature cable that is unterminated. Comes with an AT8440 cable clip, two AT8157 windscreens, two AT8156 element covers, a moisture guard, and a carrying case. Note: power module not included. Outstanding clarity and intelligibility Lightweight, ergonomic design Extremely unobtrusive, 1-inch flexible boom Secure over-the-ear placement Extended frequency response for natural vocal reproduction Available in black and beige, wired and wireless models

Audio-Technica Bp893c Microearset Headset Condenser Microphone For Wireless Systems Sennheiser 3.5Mm Beige $279 With its ergonomically molded earpiece and unobtrusive one-inch boom, Audio-Technica’s BP893c MicroEarset offers inconspicuous placement along with clear, natural vocal pickup. Its lightweight low-profile design makes the microphone ideal for use in theatrical performances, houses of worship and broadcast studios. The BP893c MicroEarset is positioned unobtrusively over the ear. Its omnidirectional miniature condenser capsule offers outstanding pickup tailored for natural vocal reproduction, with audio reproduction similar to that of a high-quality lavalier microphone. The microphone is also ideal for use in violin pickup; wear the BP893 over the ear as usual, with no need for clamps on the violin. The BP893c features a BP893 omnidirectional condenser headworn microphone with a 1.4 m (55″) permanently attached miniature cable that is unterminated. Comes with an AT8440 cable clip, two AT8157 windscreens, two AT8156 element covers, a moisture guard, and a carrying case. Note: power module not included. Outstanding clarity and intelligibility Lightweight, ergonomic design Extremely unobtrusive, 1-inch flexible boom Secure over-the-ear placement Extended frequency response for natural vocal reproduction Available in black and beige, wired and wireless models

Audio-Technica Bp893c Microearset Headset Condenser Microphone For Wireless Systems Shure Ta4f Black $279 With its ergonomically molded earpiece and unobtrusive one-inch boom, Audio-Technica’s BP893c MicroEarset offers inconspicuous placement along with clear, natural vocal pickup. Its lightweight low-profile design makes the microphone ideal for use in theatrical performances, houses of worship and broadcast studios. The BP893c MicroEarset is positioned unobtrusively over the ear. Its omnidirectional miniature condenser capsule offers outstanding pickup tailored for natural vocal reproduction, with audio reproduction similar to that of a high-quality lavalier microphone. The microphone is also ideal for use in violin pickup; wear the BP893 over the ear as usual, with no need for clamps on the violin. The BP893c features a BP893 omnidirectional condenser headworn microphone with a 1.4 m (55″) permanently attached miniature cable that is unterminated. Comes with an AT8440 cable clip, two AT8157 windscreens, two AT8156 element covers, a moisture guard, and a carrying case. Note: power module not included. Outstanding clarity and intelligibility Lightweight, ergonomic design Extremely unobtrusive, 1-inch flexible boom Secure over-the-ear placement Extended frequency response for natural vocal reproduction Available in black and beige, wired and wireless models

Audio-Technica Bp893c Microearset Headset Condenser Microphone For Wireless Systems Shure Ta4f Beige $279 With its ergonomically molded earpiece and unobtrusive one-inch boom, Audio-Technica’s BP893c MicroEarset offers inconspicuous placement along with clear, natural vocal pickup. Its lightweight low-profile design makes the microphone ideal for use in theatrical performances, houses of worship and broadcast studios. The BP893c MicroEarset is positioned unobtrusively over the ear. Its omnidirectional miniature condenser capsule offers outstanding pickup tailored for natural vocal reproduction, with audio reproduction similar to that of a high-quality lavalier microphone. The microphone is also ideal for use in violin pickup; wear the BP893 over the ear as usual, with no need for clamps on the violin. The BP893c features a BP893 omnidirectional condenser headworn microphone with a 1.4 m (55″) permanently attached miniature cable that is unterminated. Comes with an AT8440 cable clip, two AT8157 windscreens, two AT8156 element covers, a moisture guard, and a carrying case. Note: power module not included. Outstanding clarity and intelligibility Lightweight, ergonomic design Extremely unobtrusive, 1-inch flexible boom Secure over-the-ear placement Extended frequency response for natural vocal reproduction Available in black and beige, wired and wireless models

Audio-Technica Bp893c Microearset Headset Condenser Microphone For Wireless Systems Sennheiser Lemo Black $309 With its ergonomically molded earpiece and unobtrusive one-inch boom, Audio-Technica’s BP893c MicroEarset offers inconspicuous placement along with clear, natural vocal pickup. Its lightweight low-profile design makes the microphone ideal for use in theatrical performances, houses of worship and broadcast studios. The BP893c MicroEarset is positioned unobtrusively over the ear. Its omnidirectional miniature condenser capsule offers outstanding pickup tailored for natural vocal reproduction, with audio reproduction similar to that of a high-quality lavalier microphone. The microphone is also ideal for use in violin pickup; wear the BP893 over the ear as usual, with no need for clamps on the violin. The BP893c features a BP893 omnidirectional condenser headworn microphone with a 1.4 m (55″) permanently attached miniature cable that is unterminated. Comes with an AT8440 cable clip, two AT8157 windscreens, two AT8156 element covers, a moisture guard, and a carrying case. Note: power module not included. Outstanding clarity and intelligibility Lightweight, ergonomic design Extremely unobtrusive, 1-inch flexible boom Secure over-the-ear placement Extended frequency response for natural vocal reproduction Available in black and beige, wired and wireless models

Audio-Technica Bp893c Microearset Headset Condenser Microphone For Wireless Systems Lectrosonics Ta5f Black $279 With its ergonomically molded earpiece and unobtrusive one-inch boom, Audio-Technica’s BP893c MicroEarset offers inconspicuous placement along with clear, natural vocal pickup. Its lightweight low-profile design makes the microphone ideal for use in theatrical performances, houses of worship and broadcast studios. The BP893c MicroEarset is positioned unobtrusively over the ear. Its omnidirectional miniature condenser capsule offers outstanding pickup tailored for natural vocal reproduction, with audio reproduction similar to that of a high-quality lavalier microphone. The microphone is also ideal for use in violin pickup; wear the BP893 over the ear as usual, with no need for clamps on the violin. The BP893c features a BP893 omnidirectional condenser headworn microphone with a 1.4 m (55″) permanently attached miniature cable that is unterminated. Comes with an AT8440 cable clip, two AT8157 windscreens, two AT8156 element covers, a moisture guard, and a carrying case. Note: power module not included. Outstanding clarity and intelligibility Lightweight, ergonomic design Extremely unobtrusive, 1-inch flexible boom Secure over-the-ear placement Extended frequency response for natural vocal reproduction Available in black and beige, wired and wireless models

Audio-Technica Bp893c Microearset Headset Condenser Microphone For Wireless Systems Sennheiser Lemo Beige $309 With its ergonomically molded earpiece and unobtrusive one-inch boom, Audio-Technica’s BP893c MicroEarset offers inconspicuous placement along with clear, natural vocal pickup. Its lightweight low-profile design makes the microphone ideal for use in theatrical performances, houses of worship and broadcast studios. The BP893c MicroEarset is positioned unobtrusively over the ear. Its omnidirectional miniature condenser capsule offers outstanding pickup tailored for natural vocal reproduction, with audio reproduction similar to that of a high-quality lavalier microphone. The microphone is also ideal for use in violin pickup; wear the BP893 over the ear as usual, with no need for clamps on the violin. The BP893c features a BP893 omnidirectional condenser headworn microphone with a 1.4 m (55″) permanently attached miniature cable that is unterminated. Comes with an AT8440 cable clip, two AT8157 windscreens, two AT8156 element covers, a moisture guard, and a carrying case. Note: power module not included. Outstanding clarity and intelligibility Lightweight, ergonomic design Extremely unobtrusive, 1-inch flexible boom Secure over-the-ear placement Extended frequency response for natural vocal reproduction Available in black and beige, wired and wireless models

Audio-Technica Bp893c Microearset Headset Condenser Microphone For Wireless Systems Unterminated Black $239 With its ergonomically molded earpiece and unobtrusive one-inch boom, Audio-Technica’s BP893c MicroEarset offers inconspicuous placement along with clear, natural vocal pickup. Its lightweight low-profile design makes the microphone ideal for use in theatrical performances, houses of worship and broadcast studios. The BP893c MicroEarset is positioned unobtrusively over the ear. Its omnidirectional miniature condenser capsule offers outstanding pickup tailored for natural vocal reproduction, with audio reproduction similar to that of a high-quality lavalier microphone. The microphone is also ideal for use in violin pickup; wear the BP893 over the ear as usual, with no need for clamps on the violin. The BP893c features a BP893 omnidirectional condenser headworn microphone with a 1.4 m (55″) permanently attached miniature cable that is unterminated. Comes with an AT8440 cable clip, two AT8157 windscreens, two AT8156 element covers, a moisture guard, and a carrying case. Note: power module not included. Outstanding clarity and intelligibility Lightweight, ergonomic design Extremely unobtrusive, 1-inch flexible boom Secure over-the-ear placement Extended frequency response for natural vocal reproduction Available in black and beige, wired and wireless models

Audio-Technica Bp893c Microearset Headset Condenser Microphone For Wireless Systems Unterminated Beige $239 With its ergonomically molded earpiece and unobtrusive one-inch boom, Audio-Technica’s BP893c MicroEarset offers inconspicuous placement along with clear, natural vocal pickup. Its lightweight low-profile design makes the microphone ideal for use in theatrical performances, houses of worship and broadcast studios. The BP893c MicroEarset is positioned unobtrusively over the ear. Its omnidirectional miniature condenser capsule offers outstanding pickup tailored for natural vocal reproduction, with audio reproduction similar to that of a high-quality lavalier microphone. The microphone is also ideal for use in violin pickup; wear the BP893 over the ear as usual, with no need for clamps on the violin. The BP893c features a BP893 omnidirectional condenser headworn microphone with a 1.4 m (55″) permanently attached miniature cable that is unterminated. Comes with an AT8440 cable clip, two AT8157 windscreens, two AT8156 element covers, a moisture guard, and a carrying case. Note: power module not included. Outstanding clarity and intelligibility Lightweight, ergonomic design Extremely unobtrusive, 1-inch flexible boom Secure over-the-ear placement Extended frequency response for natural vocal reproduction Available in black and beige, wired and wireless models

Tour Grade Tripod Base Microphone Stand with Boom – Black $34.99 This microphone stand adjusts to 64″ for optimal microphone placement. The sturdy tripod design holds your microphone securely.

Sennheiser MZH3062 Wired Microphone $288 Sennheiser MZH3062 Wired Microphone Double section gooseneck mount for ME34, ME35 and ME36 microphone capsules. It provides flexible, accurate microphone placement and measures about 23.62" in length. Flexibility at the base and capsule sections enhance microphone placement in conferences, houses-of-worship, presentations, amd other applications. The mount is a standard 3-pin XLR male type connection that will connect directly to microphone inputs and mounting flanges. Get Your Sennheiser MZH3062 Wired Microphone Today!

Shadow Sh Sv2 Twin Disc Violin Pickup $78.4 The Shadow SH SV2 Twin Disc Violin Pickup mounts either between the wings and the feet of your violin’s bridge or between the feet and the violin’s top. You can shape the tone of your sound by varying the placement of your Shadow SH SV2 Twin Disc Violin Pickup.Twin violin transducer with 1/4″ socketMounting adhesiveCopper foil tapeEasy installationIncludes an attached 1/4″ (6.3mm) output socket

Sennheiser MZH3015 Wired Microphone $156 Sennheiser MZH3015 Wired Microphone 15 cm length. Provides a low profile, unobtrusive placement option. Use with ME36 when an inconspicuous mic is required. Get Your Sennheiser MZH3015 Wired Microphone Today!

Sennheiser MZH3042 Wired Microphone $179 Sennheiser MZH3042 Wired Microphone Double flex design. Same length as the MZH 3040 but provides an additional top bend for ultimate capsule placement precision. Get Your Sennheiser MZH3042 Wired Microphone Today!

Shure MX150 Subminiature Lavalier Microphone $199 The Shure Microflex MX150 is a professional electret lavalier condenser microphone ideal for applications requiring low-profile placement.

Violin $8.99 Rivka Violin – Art Print

The Violin $19.99 The Violin – Premium Poster

Andrea Headsets ANDNC125VM Pc Microphone Stereo Headset $37.05 Andrea Stereo PC Headset with noise canceling microphone. Includes Andrea s noise cancellation microphone technology with highest voice Recognition industry rating. Rubber softflex microphone boom for accurate microphone placement. Wind

Sennheiser MZH3072 Wired Microphone $288 Sennheiser MZH3072 Wired Microphone Sennheiser MZH3072 is an elegant gooseneck mount that provides flexible, accurate microphone placement for the ME34, ME35 and ME36 Microphone Capsules. Much like the MZH3040, the 3062 Measures approximately 27.55" (70cm) in length and features 2 gooseneck sections for added flexibility. Flexibility at the base and capsule sections enhance microphone placement in conferences, houses-of-worship, presentations, speeches, etc. The mount is terminated with a standard 3-pin XLR male type connection that will connect directly to microphone inputs and mounting flanges. Get Your Sennheiser MZH3072 Wired Microphone Today!

Ultimate Support Microphone Stand – Black $69.99 With an Ergo ergonomic clutch for easy height adjustment and a sturdy weighted base for easy placement during live shows and studio applications, this microphone stand makes it easy to position your microphone for comfortable vocal performance.

Audio-Technica ATM350 Cardioid Condenser Clip-on Instrument Microphone $279.00 Supplied with Audio-Technica’s versatile UniMount clip and new violin mount, the low-profile ATM350 is an exceptional cardioid condenser microphone designed to clip to brass, reeds, piano, snare, toms, and violin. The microphone offers a crisp, clear, well-balanced response, even at high SPLs. It features an integral 80 Hz hi-pass filter and is also equipped with a new in-line power module. Its ca…

Low-profile Condenser Instrument Microphone $215.99 The low-profile ATM350 is an exceptional cardioid condenser microphone designed to clip to brass, reeds, piano, snare, toms, and violin. The microphone offers a crisp, clear, well-balanced response, even at high SPLs. It features an integral 80 Hz hi-pass filter and is also equipped with a new in-line power module. Its cardioid polar pattern reduces pickup of sounds from the side and rear for effe…

Vocopro NUVOICE UV-3 Wireless Violin Microphone System $219 Musicians want freedom when playing their instrument – freedom to express themselves, and freedom to move. But when it comes to miking instruments, it usually means being tethered down by audio cables. With the U-Series Wireless Instrument System, you don?t have to sacrifice your freedom anymore.-The wireless transmitter easily attaches to your instrument and can run up to 12 hours on a single AAA battery. The sturdy base receiver can run on AC power or batteries for unlimited placement options. The diversity receiver design protects against signal drop-outs for total reliability. Since there are 16 user-selectable operating frequencies, up to four systems can be used simultaneously. -Diversity receiver design eliminates dropouts caused by multipathing and interference -16 operating channels allow for multiple sets to be used simultaneously -Operating range of up to 150 feet -Adjustable squelch control to minimize outside interference -TS ?” audio output -3 LEDs display power, battery, and antenna link status -Receiver can operate on 2 AA batteries or included DC power adapter -Receiver can be paired with one of five transmitters: UG-3, UG-9, UF-3, US-3, UV-3-Rear Panel Connections: Power adapter input; ?” output

Related articles:

1. Piano Microphone Placement
2. Cello Microphone Placement
3. Recording Drums Microphone Placement
4. Acoustic Bass Guitar Microphone Placement
5. Wireless Violin Microphone Pickup